1. Cut four pieces of card 8 ¼” by 5 ¾”
2. Score all four pieces of card 2 1/16” from each end to form a tri-fold.
3. On one piece score again at 1 7/8“ from each end to form a mini spine.
4. Line all the corners up and round them off together using the Zutter ½” Round-it-all.
5. Cut a further piece of card 8” by 5 ½“ and score down the middle and round all four corners.
6. Line the three tri-fold cards up end to end and tape the middle flaps to the outer two cards so you now have a long card.
7. On your spined card make holes at 2 ¾” and 3 ½” approx ¾” in from the spine on each side with your Zutter Rivet hole punch tool.
8. Now cut a straight line from each edge of your circle to form a slot.
9. Feed a piece of ribbon through the slot that is long enough to go around the card and tie.
10. Adhere the back of the middle part of your long card to cover the ribbon part of your spined card.
11. Adhere your final card to the front of the middle part of your long card to form an insert.
12. Decorate as desired!
Posts
4 comments:
Ooh, I did some of those at one of our Workshops and it went down really well. I used the Scor-it, too - doesn't it make life a whole lot easier when you don't have to measure? Love the way you've done it - never thought of using it for Christmas - duh!
Thank you so much for a fab. tutorial :-)
Carole x
Wow!!! this will be my weekend project. Thanks.
Thank you for a lovlely tutorial.
Post a Comment